manualshive.com logo in svg

Matrix SPARSH VP710, User Manual, Page: 46 / 1046

Share
Download
Matrix SPARSH VP710 User Manual Download Page 46

38

Matrix SPARSH VP710 User Guide

•

Click 

Confirm

 to save the change.

Any PnP server activated in the network responses with a SIP NOTIFY message, and the Address of the 
Provisioning server as well as the Authentication Username and Password if configured, is contained in the 
message body. Then the phone can connect to the Provisioning Server and perform the auto provisioning process.

DHCP Options 

SPARSH VP710 IP phones support obtaining the Provisioning Server details from DHCP options. You can 
configure the phone to obtain the Provisioning Server Address from a custom DHCP option, or the phone will 
automatically detect the Option 66 and Option 43. The Option 66 is used to identify the TFTP server. To obtain the 
Provisioning Server Address by a custom DHCP option, make sure the DHCP option is set properly.

SPARSH VP710 identifies the protocol of Provisioning Server as per the details configured in the DHCP 
option.

 

For example in DHCP Option 66, 

•

If only URL is configured then SPARSH VP710 will generate TFTP query 

•

If ftp://URL is configured then SPARSH VP710 will generate FTP query 

•

If http://URL is configured then SPARSH VP710 will generate HTTP query 

•

If https://URL is configured then SPARSH VP710 will generate HTTPS query 

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments