Matrix SPARSH VP710, User Manual, Page: 836 / 1046

828 Matrix SPARSH VP710 User Guide
Description
Configures the label to be displayed on the touch
screen when receiving the multicast paging calls
(Optional).
Default Value Blank
Range String within 99 characters
Example multicast.listen_address.1.label = Paging1
Parameter
-
multicast.listen_address.X.channel
(X ranges from 1 to 31)
Configuration File
<MAC>.cfg
Description
Configures the channel that the IP phone listens to.
If it is set to 0, the IP phone can receive an RTP
stream of the pre-configured multicast address
from the IP phones running old firmware version
(old paging mechanism), from the IP phones listen
to the channel 0, or from the available third-party
devices (e.g., Cisco IP phones).
If it is set to 1 to 25, the IP phone can receive an RTP
stream of the pre-configured multicast address on
the channel 1 to 25 respectively from Matrix or
Polycom IP phones.
It it is set to 26 to 30, the IP phone can receive the
RTP stream of the pre-configured multicast address
on the channel 26 to 30 respectively from Matrix IP
phones.
Default Value 0
Range Integer from 0 to 30
Example multicast.listen_address.1.channel = 2
Parameter
-
multicast.listen_address.X.volume
(X ranges from 1 to 31)
Configuration File
<MAC>.cfg