Matrix SPARSH VP710, User Manual

Page: 229 / 1046

Matrix SPARSH VP710 User Guide 221
• Enter the desired values in the BlockOut Number fields.
• Enter the desired line ID in the Account field or leave it blank
If you leave this field blank or enter 0, the block out rule will apply to all accounts on the IP phone.
• Click Confirm to add the block out number.
Block out number is configurable via web user interface only.
Dial Plan using Digit Map String Rules
Digit maps, described in RFC 3435, are defined by a single string or a list of strings. If a number entered matches
any string of a digit map, the call is automatically placed. If a number entered matches no string - an impossible
match - you can specify the phone’s behavior. You can specify the digit map timeout, the period of time before the
entered number is dialed out. You need to know the following basic regular expression syntax when creating new
dial plan:
T
The timer letter “T” indicates a timer expiry. If “T” is used alone (e.g.,
123T), the default timeout value of 3 will be used. If “T” is not used alone
(e.g., 123<Tx>, x can be a digit from 0 to 99), a complete match occurs
when waiting x seconds after inputting 123.
x
The “x” can be used as a placeholder for any digit from 0 to 9.
Example: “12x” would match “121”, “122”, “123”, etc.
[]
The square bracket "[]" can be used as a placeholder for a single character
which matches any of a set of characters.
Example: "91[5-7]1234" would match “9151234”, “9161234”, “9171234”.