Matrix SPARSH VP710, User Manual

Page: 852 / 1046

844 Matrix SPARSH VP710 User Guide
Parameter
-
features.show_action_uri_option
Configuration File
<MAC>.cfg
Description
Enables or disables the phone to pop up the Allow
Remote Control prompt.
If it is set to 0 (Disabled), the phone will not pop up
the Allow Remote Control prompt when receiving
an HTTP or HTTPS GET request, or receiving a SIP
NOTIFY message with the “Event: ACTION-URI”
header. The phone will directly perform the
specified action.
Note: It works only if the value of the parameter
“features.action_uri.enable” is set to 1(Enabled).
Default Value 1
Range
0 - Disabled
1 - Enabled
Example features.show_action_uri_option= 1
Parameter
-
features.action_uri_limit_ip
Configuration File
<MAC>.cfg
Description
Configures the IP address of the server from which
the IP phone receives the action URI requests.
For discontinuous IP addresses, multiple IP
addresses are separated by commas.
For continuous IP addresses, the format likes *.*.*.*
and the “*” stands for the values 0~255.
For example: 10.10.*.* stands for the IP addresses
that range from 10.10.0.0 to 10.10.255.255.
If left blank, the IP phone will reject any HTTP GET
request.
If it is set to “any”, the IP phone will accept and
handle HTTP GET requests from any IP address.
Note: It works only if the value of the parameter
“features.action_uri.enable” is set to 1 (Enabled).
Default Value Blank
Range IP address or any
Example features.action_uri_limit_ip = any