manualshive.com logo in svg

Matrix SPARSH VP710, User Manual, Page: 195 / 1046

Share
Download
Matrix SPARSH VP710 User Manual Download Page 195

Matrix SPARSH VP710 User Guide

187

•

Tap 

 

after the desired entry.

•

Tap 

Add

.

Edit the corresponding fields.

•

Tap 

 to accept the change or 

 and then tap 

Discard

 to cancel.

The entry is successfully saved to the local directory.

To add a contact to the blacklist directory from the mobile contacts directory:

•

Tap 

->Mobile Contacts.

•

Tap 

 

after the desired contact.

•

Tap 

Blacklist

.

 

 

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments