manualshive.com logo in svg

Matrix SPARSH VP710, User Manual, Page: 342 / 1046

Share
Download
Matrix SPARSH VP710 User Manual Download Page 342

334

Matrix SPARSH VP710 User Guide

•

You can ignore incoming calls by pressing the 

Reject

 soft key or the 

Silence

 soft key. You can also 

activate Do Not Disturb mode to ignore all incoming calls without ring on your phone. For more 
information, refer 

“Do Not Disturb (DND)”

.

•

You can forward incoming calls to someone else by pressing the 

Fwd

 soft key. For more information, 

refer 

“Call Forward”

.

Answering When Not in Another Call

Call duration and destination will always appear on the touch screen for the active call.

To answer a call using the handset:

•

Pick up the handset.

To answer a call using the hands-free speakerphone mode:

Do one of the following:

•

Press .

OR

•

With the handset on-hook and headset mode deactivated, press the 

Answer

 soft key.

OR

•

With the handset on-hook and the headset mode deactivated, tap the line key.

To answer a call using the headset:

Do one of the following:

•

Press .

OR

•

With the headset mode activated, press the 

Answer

 soft key.

OR

•

With the headset mode activated, tap the line key.

Answering When in Another Call

If you have an active call, and an incoming call arrives on the phone, The incoming call information is displayed on 
the touch screen.

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments