Matrix SPARSH VP710, User Manual, Page: 937 / 1046

Matrix SPARSH VP710 User Guide 929
Area Code
Parameter
-
dialplan.dialnow.line_id.X
(X ranges from 1 to 100)
Configuration File
<MAC>.cfg
Description
Configures the desired line to apply the dial-now rule.
The digit 0 stands for all lines. If it is
left blank, the dial-now rule will apply to all lines on the
IP phone.
Default Value Blank
Range
0, Integer from 1 to 16
Example
dialplan.dialnow.line_id.1 = 1,2
Note: Multiple line IDs are separated by commas. It
works only if the values of the parameters
“dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Parameter
-
phone_setting.dialnow_delay
Configuration File
<MAC>.cfg
Description
Configures the delay time (in seconds) for the dial-now
rule.
When entered numbers match the predefined dial-now
rule, the IP phone will automatically dial out the
entered number after the designated delay time.
If it is set to 0, the IP phone will automatically dial out
the entered number immediately.
Note: It works only if the values of the parameters
“dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Default Value 1
Range Integer from 0 to 14
Example phone_setting.dialnow_delay = 1