Matrix SPARSH VP710, User Manual

Page: 33 / 1046

Matrix SPARSH VP710 User Guide 25
To connect the PoE:
• Connect the Ethernet cable between the Internet port on the phone and an available port on the in-line
power switch/hub.
If in-line power switch/hub is provided, you don’t need to connect the phone to the power adapter. Make
sure the switch/hub is PoE-compliant.
Do not unplug or remove power while the phone is updating firmware and configurations.
Network Connection
You have two options for network connection. You can select one of them according to the current office
environment.
• Connecting to the wired network
• Connecting to the wireless network
Connecting to the Wired Network
You can connect your phone to a wired network.
Before connecting your phone to the wired network, it is important to note that the Wi-Fi feature should be disabled.
For more information, refer to
“Connecting to the Wireless Network” .
Connecting to the Wireless Network
The IP phone supports Wi-Fi feature. You can connect your phone to a wireless network. The wireless network is
more convenient and cost-effective than wired network. The PC port is unavailable when using wireless network.
For more information on how to connect to a wireless network, refer to
“Wireless Network Settings”.