Matrix SPARSH VP710, User Manual, Page: 82 / 1046

74 Matrix SPARSH VP710 User Guide
Wireless Network Settings
Wi-Fi feature enables users to connect their phones to the organization’s wireless network. The wireless network is
more convenient and cost-effective than wired network.
When the Wi-Fi feature is enabled, the IP phone will automatically scan the available wireless networks. All the
available wireless networks will display in scanning list on the touch screen.
When you connect the Ethernet cable, you can enable the Wi-Fi feature. But you have to disable the Wi-Fi
feature if you want to use the wired network.
Enabling Bluetooth may degrade your wireless network connection. For improved wireless network
performance, you should disable Bluetooth when it is not in use.
You need to take a note of the following when using the IP phones in the wireless network:
• Check whether the wireless network is normal when the account registered fails or sometimes there is no
sound during an active call.
• Ensure that the bandwidth of your wireless network is able to provide stable and real-time data
transmission otherwise the quality of video calls may be affected. We recommend you to use the wired
network for video calls.
• We recommend you to use a good quality router in your home/office environment.
• We recommend you to set the password for the wireless network so as to ensure the network resource will
not be occupied by any unknown user.
Procedure
Wi-Fi parameters can be configured manually using the configuration files or locally.
Connecting to the Wireless Network
Three ways to the IP phone to the wireless network:
• Manually connect to an available wireless network
• Wi-Fi Protected Setup (WPS)
• Manually add a wireless network
Configuration File <MAC>.cfg
Configure Wi-Fi feature.
For more information, refer “Appendix
D - Configuration Parameters” .
Local
Web User Interface
NA
Phone User Interface
Configure Wi-Fi feature.