manualshive.com logo in svg

Matrix SPARSH VP710, User Manual, Page: 340 / 1046

Share
Download
Matrix SPARSH VP710 User Manual Download Page 340

332

Matrix SPARSH VP710 User Guide

To place a call using the handset:

•

Pick up the handset.

•

Enter the desired number using the keypad or the dial pad on the touch screen. Tap 

 

to see the 

onscreen keyboard, and then you can enter the number using the onscreen keyboard.

•

Press 

, or tap 

Send

.

The # key is configured as a send key by default. You can also set the * key as the send key, or set neither. For 
more information, refer to the 

“Key as Send”

.

You can also tap 

 

or 

to search for an entry or contact after picking up the handset, and then tap the 

desired entry or contact to place a call.

You can also dial using the SIP URI or IP address. To obtain the IP address of a phone, swipe down from 
the top of the screen or swipe left/right to go to the second idle screen and then tap 

Settings->Status

. The 

maximum SIP URI or IPv4 address length is 32 characters. For example, SIP URI: [email protected], IP: 
192.168.1.15.

Your phone may not support direct IP dialing. Contact your system administrator for more information.

To place a call using the hands-free (speakerphone) mode:

Do one of the following:

•

With the handset on-hook, press 

 

or tap the line key to obtain a dial tone.

Enter the desired number using the keypad or the dial pad on the touch screen.

Press 

 

or tap 

Send

.

•

With the handset on-hook, enter the desired number using the keypad or the dial pad on the touch screen.

Press , 

 

or tap 

Send

.

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments