Matrix SPARSH VP710, User Manual, Page: 995 / 1046

Matrix SPARSH VP710 User Guide 987
Example
dialplan.digitmap.string = 1xxT|xxxxx<T1>
dialplan.digitmap.interdigit_long_timer = 10
dialplan.digitmap.interdigit_short_timer = 5
When you enter 1, it matches part of two digit maps,
the IP phone tries to wait 10 seconds and then dials out
1 if no numbers entered; When you enter 15, it also
matches part of two digit maps, the IP phone tries to
wait 10 seconds and then dials out 15 if no numbers
entered; When you enter 153, it also matches part of
two digit maps, the IP phone tries to wait 10
seconds. But after waiting for 5 seconds, it completely
matches the first digit map and then immediately dials
out 153.
Note: It works only if the value of the parameter
“dialplan.digitmap.enable” or
“account.X.dialplan.digitmap.enable” is set to 1
(Enabled). The value configured by the parameter
“account.X.dialplan.digitmap.interdigit_long_timer”
takes precedence over that configured by this
parameter.
Parameter
-
dialplan.digitmap.interdigit_short_ti
mer
Configuration File
<MAC>.cfg
Description
Configures the timeout interval (in seconds) for any
string of digit map.
The IP phone will wait this many seconds before
matching the entered digits to the dial plan
and placing the call.
Default Value 3
Range
Single configuration (configure a specific value for the
timer letter “T” for all strings with “T” of the digit map)