manualshive.com logo in svg

Matrix SPARSH VP710, User Manual, Page: 442 / 1046

Share
Download
Matrix SPARSH VP710 User Manual Download Page 442

434

Matrix SPARSH VP710 User Guide

The following screen shows a mixed conference call with three-way video calls and two-way audio-only 
calls

.

Network Conference

Network conference, also known as centralized conference, provides you the flexibility of calling multiple 
participants (more than three).You can use network conference on the IP phone to conduct an audio-only/video/
audio-only and video mixed conference with multiple participants.

This feature allows you to perform the following:

•

Join two calls together into a conference call.

•

Invite another party into an active conference call.

•

Network conference is not available on all servers. For more information, contact your system 
administrator.

•

IP phone implement network conference using the REFER method specified in RFC 4579.

•

To use this feature, contact your system administrator for the network conference URI in advance

.

Procedure

Network conference can be configured using the configuration files or locally.

Configuration File

<MAC>.cfg

Configure network conference.

For more information, refer 

“Appendix 

D - Configuration Parameters”

.

Local

Web User Interface

Configure network conference.

Navigate to

:

http://<phoneIPAddress>/servlet?m

=mod_data&p=account-adv&q=loa

d&acc=0

 

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments