manualshive.com logo in svg

Matrix SPARSH VP710, User Manual, Page: 700 / 1046

Share
Download
Matrix SPARSH VP710 User Manual Download Page 700

692

Matrix SPARSH VP710 User Guide

A wide range of performance metrics are generated in the following ways:

•

Based on current values, such as jitter, jitter buffer max and round trip delay.

•

Covers the time period from the beginning of the call until the report is sent such as network packet loss.

•

Computed using other metrics as input, such as listening Mean Opinion Score (MOS-LQ) and 

conversational Mean Opinion Score (MOS-CQ).

To operate with central report collector, the IP phone must be configured to forward their voice quality reports to the 
specified report collector. The report collector can be specified on a per-line basis.You can check the voice quality 
data of the last call via web user interface or phone user interface.You can also specify the options of the RTP 
status to be displayed on the phone user interface where as it cannot be specified on the web user interface.

Procedure

VQ-RTCPXR can be performed using the configuration files or locally.

Configuration File

<MAC>.cfg

Configure the generation of session

packets.

Configure the generation of interval

packets.

Configure the generation of alert 
packets.

Configure the phone to display RTP 
status showing the voice quality 
report of the last call on the web user 
interface.

Configure the phone to display RTP 
status showing the voice quality 
report of the last call or the current 
call on the phone user interface.

Configure the options of the RTP 
status displayed on the phone user 
interface.

Configure the central report collector.

For more information, refer 

“Appendix D - Configuration 
Parameters”

.

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments