Infineon XDPP1100, Technical Reference Manual

Page: 403 / 562

User Manual 403 of 562 V 1.0
2021-08-25
XDPP1100 technical reference manual
Digital power controller
Central processing unit subsystem
Register name Field name Access Address Bits Description
INT_ACTIVE_C
LR PWR_STAT W 5002_005Ch [0] Writing 1 clears PWRUP_DONE on
INT_ACTIVE register.
INT_ACTIVE_C
LR INSTR_DONE W 5002_005Ch [1] Writing 1 clears INSTR_DONE on
INT_ACTIVE register.
INT_ACTIVE_C
LR READ_FAULT W 5002_005Ch [2] Writing 1 clears READ_FAULT on
INT_ACTIVE register.
INT_ACTIVE_C
LR PROG_FAULT W 5002_005Ch [3] Writing 1 clears PROG_FAULT on
INT_ACTIVE register.
OTP_PWRUP_
C TPUR_PSR RW 5002_0060h [15:0] Power-up time TPUR+TPSR (in OTP
kernel clocks).
OTP_PWRUP_
C TRESR RW 5002_0060h [23:16] Reset recovery time (in OTP kernel
clocks).
OTP_PROG_C PROG_SOAK_PULS
E
RW 5002_0064h [15:0] Programming pulse for soaking (in
OTP kernel clocks).
OTP_PROG_C PROG_PULSE RW 5002_0064h [31:16] Programming pulse (in OTP kernel
clocks).
OTP_CP_C VPP_WARMDOWN RW 5002_0068h [15:0] Charge pump warm-down time (in
OTP kernel clocks).
OTP_CP_C VPP_WARMUP RW 5002_0068h [24:16] Charge pump warm-up time (in
OTP kernel clocks).
OTP_READ_C READ_TIMEOUT RW 5002_006Ch [7:0] Timeout for internally terminated
READ (a READ FAULT is thrown if
this timeout expires before STATUS
rise).
OTP_READ_C BIST_READ_TIMEO
UT RW 5002_006Ch [15:8] BIST READ pulse (in OTP kernel
clocks).
OTP_READ_C PROG_RECOVERY_T
IME RW 5002_006Ch [20:16] Program recovery time (in OTP
kernel clocks).
OTP_READ_C MAXCNT_SOAK RW 5002_006Ch [31:24] MAX soaking pulse allowed.
ERR_RPT AHB_ILL_APB_ACC R 5002_0070h [0] Read access on OTP shell AHB port
while OTP was busy on an APB
command
– HRESP=ERR generated.
ERR_RPT AHB_ILL_WR R 5002_0070h [1] Write access on OTP shell AHB port
detected
– HRESP=ERR generated.
ERR_RPT OTP_ADDR R 5002_0070h [27:16] OTP address when the violation
occurred.
ERR_RPT_CLR CLR W 5002_0074h [31:0] Write clears all fields on ERR_RPT
register.
OTP_BIST_C BMODE_SEL RW 5002_0078h [2:0] OTP memory space select.
0: Main memory space
1: Boot memory space
2, 3: RDNT memory space
4, 5: Main + boot memory spaces