R&S ZNC3, Руководство пользователя

Страница: 545 / 795

Command Reference
R&S
®
ZNC
529 User Manual 1173.9557.02 ─ 13
<TouchstoneFile> String parameter to specify the name and directory of the created
Touchstone file. The file extension
*.s<n>p
for a n-port Touch-
stone file is mandatory. If no path is specified the analyzer uses
the current directory, to be queried with
​
MMEMory:
​
CDIRectory
​
?
.
<Format> COMPlex | LINPhase | LOGPhase
COMPlex - complex values (real and imaginary part).
LINPhase - Linear magnitude and phase.
LOGPhase - dB-magnitude and phase.
<Port> First port number
<Port> Second port number. Further port numbers can be used as nee-
ded.
Example: Suppose that a full four-port calibration for ports 1 to 4 and channel
1 has been performed, and that a DUT with two balanced ports is
connected. The analyzer measures an arbitrary mixed mode S-
parameter.
MMEM:STOR:TRAC:PORT 1, 'Test.s4p', COMPlex,
1,2,3,4
Calculate all single-ended S-parameters and store them to a four-
port Touchstone file.
Usage: Setting only
Manual operation: See "Export..." on page 174
6.3.12 OUTPut Commands
The
OUTPut...
commands control the characteristics of the analyzer’s output ports.
OUTPut<Ch>[:
​
STATe]
​ ....................................................................................................529
OUTPut:
​
UPORt:
​
ECBits
​ ...................................................................................................530
OUTPut<Ch>:
​
UPORt[:
​
VALue]
​
.........................................................................................530
OUTPut<Ch>[:STATe] <Boolean>
Turns the internal source power at all ports and the power of all external generators on
or off.
Suffix:
<Ch>
.
Channel number. This suffix is ignored; the setting is valid for all
channels.
Parameters:
<Boolean> ON | OFF - switch the power on or off.
*RST:
ON
Example: OUTP OFF
Turn off the RF source power.
Manual operation: See "RF Off All Channels" on page 213
SCPI Command Reference