GUI Reference
R&S
®
ZNC
118
User Manual 1173.9557.02 ─ 13
The port configurations are arranged in a scrollable list. The resulting port number
assignment is shown on the left-hand side of the "Predefined Configs" tab.
●
For a single-ended port, the diagram shows a single line between the physical test
port and the logical port.
●
For a balanced port, two physical ports are combined to form a single logical port.
●
For unused ports, the physical port is crossed out; no logical port number is assigned.
Select Predefined
List of predefined port configurations.
Three configurations are possible: Two single-ended ports, one balanced port, only one
port uses (single-ended reflection measurement).
Remote command:
User Configs
The "User Configs" tab of the "Balanced Ports" dialog defines a new balanced port con-
figuration.
Access:
E.g. TRACE > MEAS > S-Params > Balanced Ports...
Define Physical to Logical Port Relation
Defines balanced, single-ended, and unused ports. The two physical ports of the analyzer
can be combined into a balanced port.
●
To define a balanced port, select two physical ports and tap "Balanced".
Trace Settings
