GUI Reference
R&S
®
ZNC
107
User Manual 1173.9557.02 ─ 13
New
Creates a new recall set. The default names for recall sets are "Set1", "Set2" ... Recall
sets are accessible via tabs in the diagram area:
Tip:
To open an existing recall set, use "Open Recall...". To rename a setup, use "Save..."
Remote command:
Open Recall
Loads an existing recall set from a file. The analyzer opens a dialog box to select the file
from all VNA recall set files (
*.znx
) stored on the file system; see
opened recall set replaces the active recall set.
Remote command:
Recall dialog
Specifies the name and location of a particular file (e.g. a VNA recall set file) to open:
●
"Look in:" specifies the drive and directory in which the file to open is stored. The
icons to the right of the pull-down list are provided for easy navigation in the file system
(place the cursor on the icons to obtain "What's this?" help).
●
"File name:" specifies a file name (e.g. a recall set file, *.znx) to open. The file can be
selected by tapping on the directory overview above.
●
"Files of type:" selects a particular file type (e.g. recall set files, *.znx) to be displayed
in the directory overview.
●
"Open" opens selected file and closes the dialog.
●
"Cancel" closes the dialog without opening a recall set file.
●
"Windows Explorer" opens the selected directory in Windows Explorer.
File Settings
