GUI Reference
R&S
®
ZNC
276
User Manual 1173.9557.02 ─ 13
4.4.4 Channel Config
The "Channel Config" functions select, create and delete channels and optimize the
measurement process.
4.4.4.1
Channel Config > Channels
Creates and deletes channels and selects a channel as the active channel.
You can monitor the channel activity using the
com-
mand and the output signals at pins 8 to 11 of the "USER PORT" connector.
Background information
Refer to
chapter 3.1.3.3, "Active and Inactive Traces and Channels"
Access:
CHANNEL > CHANNEL CONFIG key or Alt + Shift + O
Active Channel
Selects an arbitrary channel of the active recall set as the active channel. This function
is disabled if the current recall set contains only one channel.
If one or several traces are assigned to the selected channel, one of these traces
becomes the active trace.
The order of all channels in a recall set is given by the channels' creation time. By default,
the channels are named Ch1, Ch2, ... so that Ch<n – 1> precedes Ch<n>. This order is
always maintained, even if channels are renamed, invisible (because no traces are
assigned to them) or distributed over several diagram areas.
Tip:
You can simply tap a line in the channel list to activate the corresponding channel.
Remote command:
The numeric suffix <Ch> appended to the first-level mnemonic of a command selects a
channel as the active channel.
Channel Settings
