Concepts and Features
R&S
®
ZNC
82
User Manual 1173.9557.02 ─ 13
For R&S ZNC analyzers, the calibration unit R&S ZV-Z51 is recommended, however, all
of the calibration units listed below can be used.
The connector types of the calibration unit should be selected according the connectors
of the DUT.
Calibration unit
Frequency range
Connector type
No. of ports
Order no.
R&S ZV-Z51
300 kHz to 8 GHz
type N (f)
4
1164.0515.70
R&S ZV-Z51
300 kHz to 8 GHz
3.5 mm (f)
4
1164.0515.30
R&S ZV-Z52
10 MHz to 24 GHz
3.5 mm (f)
4
1164.0521.30
R&S ZV-Z53
300 kHz to 18 GHz
type N (f)
2
1164.0473.72
R&S ZV-Z53
300 kHz to 24 GHz
3.5 mm (f)
2
1164.0473.32
R&S ZV-Z54
10 MHz to 40 GHz
2.92 mm (f)
2
1164.0467.92
R&S ZV-Z55
10 MHz to 50 GHz
2.4 mm (f)
2
1164.0480.42
R&S ZV-Z58
300 kHz to 8 GHz
type N (f)
8
1164.0638.78
R&S ZV-Z58
300 kHz to 8 GHz GHz
3.5 mm (f)
8
1164.0638.38
R&S ZV-Z58
10 MHz to 20 GHz
3.5 mm (f)
6
1164.0450.36
The units contain calibration standards that are electronically switched when a calibration
is performed. The calibration kit data for the internal standards are also stored in the
calibration unit, so that the analyzer can calculate the error terms and apply the calibration
without any further input.
Calibration
