Command Reference
R&S
®
ZNC
546
User Manual 1173.9557.02 ─ 13
<CalKitLabel>
String parameter containing the label of a calibration kit available
on the analyzer, usually the serial number.
*RST:
n/a (A *RST does not change the assignment
between connector types and calibration kits.)
Example:
MMEM:LOAD:CKIT 'C:\Users\Public
\Documents\Rohde-Schwarz
\Vna\Calibration\Kits\New Kit 1
(123456).calkit'
Load the previously created cal kit file
New Kit 1 (123456).calkit
from the default cal kit directory.
CORR:CKIT:N50:LSEL 'New Kit 1', '123456'
Assign the imported kit to the N 50 Ω connector type, assuming
that the cal kit name stored in
New Kit 1 (123456).calkit
reads
New Kit 1
and that its label reads
123456
.
[SENSe:]CORRection:CKIT:LCATalog?
<ConnectorType>
Returns a list of all cal kits and their labels for a given connector type.
Parameters:
<ConnectorType>
Name of the connector type. Use
names.
Example:
See
Usage:
Query only
[SENSe:]CORRection:CKIT:LDELete
<CalKitName>, <Label>
Deletes an imported or user-defined cal kit which is identified by its cal kit name and label.
Note:
It is not possible to modify or store predefined or ideal kits.
Parameters:
<CalKitName>
String parameter containing an imported or user-defined calibra-
tion kit available on the analyzer.
<Label>
String parameter containing the label of an imported or user-
defined calibration kit available on the analyzer.
Example:
See
Usage:
Setting only
[SENSe:]CORRection:CKIT:LLABel
<CalKitName>, <CalkitLabel>[, <NewLabel>]
Assigns a calibration kit label to an imported or user-defined calibration kit or renames
an existing calibration kit label.
SCPI Command Reference
