Maintenance-Object Repair Procedures
555-233-143
8-1010
Issue 1 May 2002
2038,
2039
ABORT
A problem occurred while trying to read the test data.
1. Wait 1 minute and then try again. If the test aborts again in the same
manner, there is a serious internal problem.
2040
ABORT
Internal system error. Follow recommendations for ABORT code 2012.
2041
ABORT
The call has timed out, perhaps because of a lack of system resources. Follow
recommendations for ABORT code 2035.
2066
ABORT
Could not establish test call.
1. Retry the command at 1-minute intervals up to 5 times.
2067
ABORT
The call has timed out, perhaps because of a lack of system resources. Follow
recommendations for ABORT code 2035.
2074
ABORT
Bit and Block Error query failed.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to abort, there may be a serious internal problem with
M/T-DIG (Maintenance/Test Digital Port). If this is the case, see
(Maintenance/Test Digital Port)’’
2075
ABORT
Internal system error. Follow recommendations for ABORT code 2012.
2100
ABORT
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
2104
ABORT
Call dropped or could not be originated.
1. Make sure service is provisioned by the network.
2. Check the administration of the far-end test line extension on the trunk
group administration form.
3. Check the administration of the Testcall BCC (Bearer Capability Class) on
the trunk group administration form.
4. Check the reason for termination with status isdn-testcall.
5. For further instructions see
‘‘Troubleshooting ISDN-PRI Test Calls’’
6. Try the test again.
2201,
2202,
2203,
2204,
2205
ABORT
Internal system error. Follow recommendations for ABORT code 2012.
2206
ABORT
Could not allocate the necessary system resources to run this test. Follow
recommendations for ABORT code 2100.
2208
ABORT
Internal system error. Follow recommendations for ABORT code 2012.
Table 8-400.
Test #258 ISDN Test Call —
Continued
Error
Code
Test
Result
Description / Recommendation
Continued on next page
Summary of Contents for S8700 Series
