Avaya S8700 Series, Maintenance Manual

Page: 116 / 2618

Alarms, Errors, and Troubleshooting
555-233-143 4-42 Issue 1 May 2002
■
State
should be
present
, indicating that A500 port board
insertion was successful. If
State
is
invalid
, then the A500
believes that the corresponding port board slot is empty or the port
board is not recognized.
It may be necessary to re-administer the A500 port boards. Refer to
the Cajun A500 Quick Reference for further information.
■
If
Admin Status
or
State
is incorrect, the links will not come up
between a non-IPSI-connected EPN and its controlling
IPSI-connected EPN.
TN230X
Did the TN230X come up correctly?
1. Review the LED conditions for the TN230X:
■
Do the TN230X LEDs (see Table 4-4 on page 4-28 ) indicate a
normal operational state (any of the following):
— Archangel mode in the EPN
— Standby in the EPN
2. If after board insertion or a demand reset:
■
Do the TN230X LEDs indicate that it is booting?
■
Do the TN230X LEDs indicate it is downloading its DSPs?
■
Do the TN230X LEDs indicate that board insertion has not yet
occurred?
■
Do the TN230X LEDs indicate a maintenance alarm?
3. Enter list configuration carrier cabinet carrier on the S8700
Multi-Connect SAT. See the following Figure 4-21 (1b) and Figure 4-22 on
page 4-43 (2a).