Avaya S8700 Series, Maintenance Manual

Page: 569 / 2618

status conference
Issue 1 May 2002 7-313 555-233-143
Gx
Does it have the Still Frame Graphics capability? -
y
,
e
,
blank
■
y
This endpoint has this capability.
■
e
This endpoint did not declare this capability. The conference retains
the still frame graphics capability when a non-compliant endpoint joins
the conference.
■
blank
This endpoint has never joined the conference.
Rate Adpt
Rate adaptation/interworking indicator - 5 , 6 , y , c , e , n , blank . Values of
5 and 6 apply only to low-speed/high-speed Interworking. Every other
value applies only to rate adaptation.
■
5 A 56-kbps (low-speed) endpoint has joined a high-speed (128-kbps
or above) conference. This endpoint is connected with audio-only
capability, but is neither a valid video source nor destination.
■
6 A 64-kbps (low-speed) endpoint has joined a high-speed (128-kbps
or above) conference. This endpoint is connected with audio-only
capability, but is neither a valid video source nor destination.
■
y This endpoint has joined a conference at the administered rate of
64 kbps, but (because rate adaptation to 56 kbps was triggered by
another endpoint) this endpoint has successfully rate-adapted to 56
kbps.
■
c
The administered bandwidth of a conference is 64 kbps and this
endpoint has joined the conference at 56 kbps. The first 56-kbps
endpoint that joins a 64-kbps rate-adaptable conference triggers rate
adaptation (see
Join Time below).
■
n A 64-kbps conference was triggered to rate adapt to 56 kbps by
some other endpoint. This endpoint joined the conference at the
bandwidth of 64 kbps, but encountered problems in rate adapting down
to 56 kbps. This endpoint may have the audio and may be receiving
video, but is not a valid video source.
■
blank Rate adaptation was never triggered by any endpoints. So, if
an endpoint is in use and connected, then it joined the conference at
the administered bandwidth.
Bond Mode
BONDing Mode - blank. This field is blank for calls that are not related to
bonding.