Avaya S8700 Series, Maintenance Manual

Page: 1877 / 2618

M/T-ANL (Maintenance/Test Analog Port)
Issue 1 May 2002 8-1155 555-233-143
Hook State Inquiry (#566)
This test ensures that the Maintenance/Test analog port maintenance software
and call processing agree on the on-/off-hook status of the Maintenance/Test
analog port.
Table 8-475. Test #566 Hook State Inquiry
Error
Code Test
Result
Description / Recommendation
1 ABORT Switch hook audit timed out. No response was received from the circuit pack
for information about the switch hook state.
1. Retry the command at 1-minute intervals up to 3 times.
2. If the test continues to abort, replace the circuit pack and repeat the test.
2100 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals up to 3 times.
Any FAIL Internal system error
1. Retry the command at 1-minute intervals up to 3 times.
2. If the test continues to fail reset the circuit pack via the busyout board
UUCSS, reset board UUCSS, release board UUCSS command
sequence.
3. Retry the command at 1-minute intervals up to 3 times.
PASS Call processing and Maintenance/Test analog port maintenance software
agree on the Maintenance/Test analog port hook state.
Continued on next page