Avaya S8700 Series, Maintenance Manual

Page: 583 / 2618

status conference
Issue 1 May 2002 7-327 555-233-143
Field Descriptions
Join Time
Time (in 24-hour notation) when the channel joined the conference.
Drop Time
Time (in 24-hour notation) when the channel disconnected. If the first channel
has a drop time, then it means that the endpoint is idle. If there is a drop time
without a join time, it means that the call disconnected without being joined to
the conference.
Drop Reason
The reason for the channel’s disconnect:
■
2-pri This drop reason occurs when an administration error causes a
mismatch in primary-secondary designation for a cascade link. This
mismatch shows that both MCUs are administered as primaries (see
“Cascading” for a description of primary-secondary compatibility).
■
2-sec
This drop reason occurs when an administration error causes a
mismatch in primary-secondary designation for a cascade link. This
mismatch shows that both MCUs are administered as secondaries (see
“Cascading” for a description of primary-secondary compatibility).
■
Agent The reservation agent has caused the call to disconnect (for
example, the agent has changed a connected dial-out destination number).
■
Bandwidth
mismatch between a call and the conference it attempted to
join. For example, a 56-kbps call attempted to join a 64-kbps conference
that does not allow rate adaptation.
■
BondHshake
BONDing handshake drop reason can be caused due to
the following reasons: information channel parameter not supported or
invalid, parameter negotiation terminated out of sequence, timer expired
because of the secondary channels did not establish, or BONDing framing
was not detected for one of the other channels.
■
Busy
This dial-out drop reason occurs when the MCU detects that the
conferee’s terminal equipment is busy. This drop reason is detected by an
ISDN cause value (for example h0). See “Dial-out” for a description of
CPTR usage.
■
Chair disconnected the endpoint, using either Chair Command
Disconnect (CCD) or Chair Command Kill (CCK) signals.
■
Conf End
The conference was ended due to reaching stop time for a
reserved conference or due to an active conference being converted to file.