3-16
3.2 Messages and Actions
W-1763
The printing operation cannot be
canceled while the image is mounted.
Complete a mounted print, or press
the [Print] or the [Cancel] button in
the “Image Preview” screen, and then
try it.
The process in progress was forcibly
terminated while mounted or frame/
character printing was in progress.
Wait until one mounted print is
completed, or select [Print] or
[Cancel] on the image preview
screen.
W-1764
Cannot replace the magazine while
the Printing Status Notice screen is
displayed.
To replace it, exit this screen.
This message instructs you not to
replace the magazine while the
Printing Status Notice screen
appears.
Exit this screen to replace the paper
magazine.
I-1765
Film driving mode was changed.
This message appears when the film
driving mode is changed during the
view and check of images.
–
W-1771
Cannot perform the billing service for
DSC.
Check the network connections.
This message appears when an error
occurred during the DSC billing
output.
(Cause of the error message)
1. Poor connection of cable to FDiA
2. Faulty cable to FDiA
1. Connect the cable securely.
2. Replace the cable.
E-1772
Couldn’t open the service menu
setting file.
This message appears when the
service menu setting file does not
exist or when it cannot be opened.
(Causes of the error message)
1. No setting file
2. Abnormal floppy disk
1. Make setting file.
2. Try again with another FD.
E-1773
Incorrect parameter is written in the
service menu setting file.
This message appears when value
written in the service menu setting file
exceeds the range.
Set up the file correctly.
E-1774
Cannot perform the DI service
registered in the Service Menu.
#####
This message appears when the
digitizing service that was registered
in the service menu setting file cannot
be found in the Imaging Controller.
Change the service menu setup file
to the optimum setting.
E-1775
1st service menu not found.
Check the service menu setting file.
This message appears when the
service menu Button 1 is not
displayed, or when any parameter
error occurs.
Set up Button 1 to “Display”. Set up
the parameter correctly.
E-1776
Proper service type is not registered
for the 1st service menu. Check the
service menu setting file.
This message appears when the
proper service is not registered for
the service menu button 1.
Set up the proper service to Button 1.
W-1777
Carrier not installed.
Install it, and then select the service
menu again.
This message appears if the carrier is
not installed when the service menu
button is pressed.
Install the carrier correctly.
W-1778
The carrier for #### is not installed.
Replace it, and then select the
service menu again.
This message appears if the proper
carrier is not installed when the
service menu button is pressed.
Install the proper carrier correctly.
W-1779
Because the wrong carrier is
installed, the film type cannot be set
to ####.
Replace it, and then select the
service menu again.
This message appears if the proper
carrier is not installed when the
service menu button is pressed.
Install the proper carrier correctly.
No.
Message
Factor
Actions