5-64
5.4 Scanner Adjustment/Maintenance (03)
●
Reading
Each button becomes effective when the circuit board
has been replaced.
1. Click the [Reading] button.
2. Click the [OK] button.
• The parameters saved in the HD are written into
the EEPROM.
3. Click the [Close] button.
• Operation returns to the menu screen.
●
FD Reading
Use this procedure when the CCD unit has been
replaced.
1. Insert the displacement sensor parameter FD
attached to the CCD unit into the FD drive of the
main control unit.
2. Click the [FD reading] button.
3. Click the [OK] button.
• The parameters are written from the FD into the
HD of the main control unit and the EEPROM of
the CPZ23 circuit board.
4. Remove the FD.
5. Click the [Close] button.
• Operation returns to the menu screen.
6. On Menu 0351 “CCD Adjustment”, perform “AD
Timing Adjustment”, “OFD Voltage Adjustment”
.
Z
2
041
Displacement Sensor Parameter FD
