5-102
5.6 Printer Adjustment/Maintenance (05)
This procedure creates test pattern prints.
[Selection]
[Setup and Maintenance]
→
[05 Printer Adjustment/
Maintenance]
→
[0541 Test Pattern Printing]
1. Move the cursor to “Test pattern selection”, and
select “Grid”, “Borderless contact”, “Bordered
contact”, “Gradation”, “Back print 1 (wedge)”,
“Back print 2 (line)”, “Back print 3 (character)” or
“Frame print”.
2. Move the cursor to “Length” and enter the feed
length (mm).
3. Move the cursor to “Q’ty” and enter the number of
prints.
4. Click the [Print] button.
• After about three minutes, the print is output to
the sorter.
■
Color Drift Inspection
1) Make a grid test print.
2) Use a magnifying lens (X25) to check that the
vertical line for the color drift is 1/8 pixel or less in
width, and the horizontal line is 1/4 pixel or less in
width.
Reference: 1 pixel width = 0.08mm
5. Click the [Close] button.
• Operation returns to the menu screen.
5.6.9
Test Pattern Printing (0541)
