5-24
5.3 Print Condition Setup and Check (02)
5. Find the appropriate paper from the table on the
screen and install its ID chip to the magazine
using the screw.
6. Click the [Close] button.
• Operation returns to the menu screen.
This procedure sets the color balance of the monitor
for each input type.
[Selection]
[Setup and Maintenance]
→
[02 Print Condition Setup
and Check]
→
[0222 Monitor Adjustment]
1. Make a print without color and density correction
with a normal film using the master channel for
“Custom Setting”.
2. On the printing screen, correct the pre-scanning
image so that it matches the print using the C, M
and Y keys.
3. Multiply each of the correction values by the “Key
Step Width Setup” value of Menu 0225 “Custom
Setting Regist/Delete”. Then enter the results in
the respective boxes on the screen.
<Example>
“Key Step Width Setup” values of the master
channel (0) an Menu 0225 “Custom Setting
Register/delete”:
C: 8
M: 8
Y: 8
Correction values in Step 2:
C: +2
M: –1
Y: 0
L
2
366
ID Chip
Screw
5.3.4
Monitor Adjustment (0222)
