5-110
5.6 Printer Adjustment/Maintenance (05)
4. Click the [OK] button.
5. Click the [Close] button.
• Operation returns to the menu screen.
This procedure adjusts the printer mechanism.
[Selection]
[Setup and Maintenance]
→
[05 Printer Adjustment/
Maintenance]
→
[0551 Printer Mechanical Fine
Adjustment]
1. “Cutter: Feed motor stop timing”:
Sets up the feed motor stop timing when
supplying paper. Click the [Set] button.
2. “Eject: Right/left speed control start timing”:
Sets up the speed control start timing of the
M665 motor when feeding sheets papers with
single lane. Click the [Set] button.
3. “Setup of precut length”:
Sets up the leading end cut-off length of paper
for each magazine when the roll paper is set,
or first print after eight hours has elapsed from
the rewinding paper.
4. “Adjustment for distributing position”:
Adjusts distribution position and nip timing for
each magazine. Click the [Set] button.
5. Click the [Close] button.
• Operation returns to the menu screen.
5.6.19
Printer Mechanical Fine Adjustment (0551)
