5-22
5.3 Print Condition Setup and Check (02)
This procedure registers the paper magazine to be
used.
Change the dryer temperature if necessary.
[Selection]
[Setup and Maintenance]
→
[02 Print Condition Setup
and Check]
→
[0221 Paper Magazine Registration]
“ID”:
Enter the magazine ID.
“Width”:
Enter the paper width (mm).
“Paper”:
Select the paper surface type.
“Length”:
Enter the roll paper length (m).
“Remain”:
Enter remaining paper length (m).
“BP”:
Select “YES” or “NO” for back printing.
“Line speed”: Selected automatically according to the
“Type”.
“Type”:
Select the paper type correctly. The
paper type is indicated on the paper
package.
[Set] button:
Click this button to register the entered
items.
“ID”:
Enter the magazine ID.
“P1R”:
Enter the P1R replenishment rate.
“P2R”:
Enter the P2R replenishment rate.
“PSR”:
Enter the PSR replenishment rate.
“Correct value”: Enter the correction value of the
dryer temperature.
[Set] button:
Click this button to register the entered
items.
NOTE: Do not change the “P1R”, “P2R”, “PSR” and “Correct
value” values.
1. Release the latches and open the paper
magazine.
5.3.3
Paper Magazine Registration (0221)
↓
[Next page] [Prev page]
↑
L
2
360
Paper Magazine
Latches (2)
