FujiFilm Frontier 570 Скачать руководство пользователя страница 591

Страница: 591 / 1011

9-17

9.3 Main Control Unit

5. Remove the FD from the FD drive.

6. Press the [Alt] and [Del] keys simultaneously while

pressing [Ctrl] key.

• The main control unit is started.

7. Press the [F2] key immediately after the white

characters appear on the black background.

• The BIOS setup screen appears.

• The cursor is positioned on “System Time:”.

NOTE: Do not change the items other than the date and

time.

8. Select hour/minute/second by pressing the [Tab]

key and set the current time by pressing the [+] or

[–] key of the numeric keys on the full keyboad.

Press the [+] key to put forward the hour/minute/

second.

Press the [–] key to put back the hour/minute/

second.

NOTE: The [+] and [-] keys of the alphabet keys cannot

be used.

9. Press the [

↓

] key to move the cursor to “year/

month/date:”

10. Select year/month/date by pressing the [Tab] key

and set the current date by pressing the [+] or [–]

key of the numeric keys on the full keyboard.

Press the [+] key to put forward the year/month/

date.

Press the [–] key to put back the year/month/date.

11. Press the [F10] key.

• The “Setup Confirmation” dialog box appears.

12. Press the [

←

] or [

→

] key to move the cursor to

[Yes].

13. Press the [Enter] key.

• The main control unit is restarted.

042

Distributed by minilablaser.com

Содержание Frontier 570




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды

FujiFilm Frontier 570, Руководство по обслуживанию

Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды