5-34
5.3 Print Condition Setup and Check (02)
• The “Key Step Width/BL-SL” panel appears.
3) Set up the key step width and balance/slope.
NOTE: Click [Default] to return to the initial values.
<Key Step Width Setup>
Dc, Dm, Dy: Normally enter “15”.
<BL/SL Setup>
Normally enter “0”.
4) Click the “Sharpness/Grain Control” tab.
• The “Sharpness/Grain Control” panel
appears.
5) Select “Hyper-sharpness” for “Sharpness
process”. Set up “Sharpness”, “Grain Control
Process”, “Sharpness Large-size Setup” and
“Minimizing Color Spreading”.
<Sharpness>
Sharpness Level: Low 3
Low 2
Low 1
Normal
High 1
High 2
High 3
Under Level:
-2
-1
0
(Sharpness can only be set individually for under
level.)
<Grain Control Process>
Grain Coarseness
Higher
Invisible
Normal
↑
Lower
Visible
<Sharpness Large-size Setup>
Sharpness can be setup individually for
large-size prints exceeding the
magnification entered in the
“Magnification” box.
–2
–1
0
+1
+2
