INTRODUCTION
This Servicing Manual outlines the maintenance and servicing procedures for the Fujifilm Digital Minilab
FRONTIER 570 SP-3000 and LP5700.
This manual is a professional publication provided for qualified service personnel or persons fully trained in
equipment service procedures. All other personnel and operators are restricted from servicing the SP-3000 and
LP5700. When maintenance service is needed, be sure to contact qualified service personnel.
Precautions Generally Applying to All Serving Operations
When servicing internal machine parts, make sure the built-in circuit breaker and the main power supply on the power
distribution board are both set to the OFF position and the scanner’s power supply cord is disconnected from the wall outlet.
If the main power is left ON, electricity will flow as far as the power supply section, and this can cause electric shocks and/or
short-circuiting.
If the power is left on, there is also the possibility for the machine to maybe accidentally activated causing damage to the
machine and/or bodily injury.
The dryer will be hot to the touch. Wait 15 minutes after turning off the power before commencing with servicing procedures.
• Wear gloves when handling the optical system parts to keep the parts free from fingerprints.
• When mounting machine parts, take care not to sandwich any of the wires.
• Each of the connectors is provided with a symbol indicating what it is to be connected to. Make sure the connectors are
connected to the connectors, harness ends or parts bearing the corresponding symbols.
• The plastic connectors have a locking catch on the plug (male) end. To disconnect one of these connectors, loosen the
catch first; to connect, make sure the catch engages (locks).
WARNING
!
CAUTION
!
Service Manual Appropriations
1. All rights are reserved by the Fuji Photo Film Co., Ltd. (FUJIFILM).
2. Manual usage is restricted to FUJIFILM equipment related technical and service
personnel.
3. This manual contains information relating to FUJIFILM equipment and is therefore
proprietary. Unauthorized disclosure is prohibited.
4. FUJIFILM’s prior consent is required in regard to the following.
K
Manual copying in whole or in part.
K
Disclosure of manual contents to unauthorized personnel.
K
Manual uses for purposes other than technical service.