FujiFilm Frontier 570 Скачать руководство пользователя страница 311

Страница: 311 / 1011

5-15

5.2 System Operation Setup and Check (01)

This procedure sets the installation information.

After setting up, restart the system to activate the new

settings.

[Selection]

[Setup and Maintenance]

→

[01 System Operation

Setup and Check]

→

[0140 Installation Information

Setup]

1. Set the delivery date, startup date and lab ID.

2. Click the [Option] button.

3. Select “Not used” or “COM1” for “PU800BA”.

4. Select “Not used” or “COM3” to “COM6” for “Bar-

code Reader”.

5. Select “YES” or “NO” for “External File I/O”.

6. Click the [OK] button.

• The dialog box disappears.

7. Click the [OK] button.

• The dialog box appears.

8. Click the [OK] button.

• Operation returns to the menu screen.

9. Perform the post-operational checks to shut down

the system and then restart the system.

• The new settings are activated.

5.2.11

Installation Information Setup (0140)

Distributed by minilablaser.com

Содержание Frontier 570




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды

FujiFilm Frontier 570, Руководство по обслуживанию

Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды