background image

Install the Ink Tanks

Unpack the Printer

2

3

4

5

Prepare the Printer

Install the Print Head

Connect the Printer 

To Your Computer

Start Here

Easy Setup Instructions 

i

9100

 Series

Photo Printer

Insert the ink tank into the correct slot. 
(Refer to the color guide on the print head).

Press down until the ink tank locks into place.

Slide the print head into the holder. 
The print head will rest at a slight angle.

Remove the print head from its package.

Remove the orange protective cap
from the print head. 

NOTE:

 Do not touch the electrical contacts.

Lower the lock lever and press it down 
until it locks into place.

Raise the lock lever on the printer.

Electrical contacts

Print Head nozzles

Tear at notch to open

Plug the power cord into the back of the 
printer and connect the other end to a 
power outlet.

Open the front cover. The print head holder
automatically moves to the center. Remove 
the protective tape.

Write down the serial number located to 
the right of the print head. You will need 
this later to register the product.

NOTE: 

USB cable is not included.

Serial number

Protective tape

Press the POWER button.

Remove the shipping tape from the 
front of the printer. 

POWER

Lamp

POWER

Button

Shipping Tape

i

9

100 Series

Photo Printer

Carefully remove all items from the box.

Documentation 

and Software Kit

Paper Rest

Peel back the orange tab and completely 
remove the plastic wrapper from the Yellow 
Ink Tank (BCI-6Y). 

Twist off and discard the orange 
protective cap.

NOTE: 

To avoid spilling ink, never press
on the sides of an ink tank.

Insert the remaining five ink tanks into 
their assigned slots.

Close the front cover, attach the paper rest 
and extend the paper output tray. 

Protective cap

Ink Tanks

         BCI-6C Cyan 

BCI-6M Magenta

BCI-6BK Black 

BCI-6Y Yellow

BCI-6PC Photo Cyan

BCI-6PM Photo Magenta

Power Cord

i

9

100 Series

 Print Head

USB Port

USB Cable

Continue with Step 6
on side two.

TURN THE PRINTER OFF

.

Connect one end of the USB cable 
to the computer, the other to the printer.

IMPORTANT:

 Be sure the printer is 

off before continuing, or the computer 
will attempt to install the printer 
driver before the printer is ready.

1

2

3

4

1

5

4

3

1

2

1

2

3

4

5

1

2

Reviews: