Nortel BCM 3.7, Manual

Page: 833 / 1004

833
Programming Operations Guide
Appendix A
Defining region-based defaults
This section describes some of the differences in the system default s . These defaults are
set based on the region or telephony or CallPilot template that you select in the Quick Start
wizard when the system is first configured. Each region is designed using a set of system
defaults that provide specific functionality for the geographical area in which the system is
deployed.
This section includes information about:
• “Region-based system settings”
• “BRI and PRI line types” on page 845
• “CallPilot regions” on page 847
Region-based system settings
The tables in this section provide information about different settings that affected by the
region assigned to the system.
• “Core software and regions” on page 834
• “Languages” on page 834
• “Caller ID displays” on page 835
• “Companding Law by region” on page 836
• “Mobility services by region” on page 836
• “Media bay module availability by region” on page 837
• “FEM-trunk module combinations by region” on page 838
• “PRI line protocol support, by region” on page 839
• “Supported ISDN line services” on page 840
• “Defining time zones by country and language” on page 841
• “System feature defaults” on page 841
• “Dialing plan defaults” on page 844