Nortel BCM 3.7, Manual

Page: 89 / 1004

Manually activating Telnet 89
Programming Operations Guide
Figure 12 Business Communications Manager Main Menu
11
Refer to the specific tasks that require this menu for details about using this it.
Manually activating Telnet
If you choose to continue operating the text-based menus with Telnet, rather than using the PuTTY
client, you can manually activate the service from the Unified Manager.
Note: If you are using a cross-over cable to make a direct connection, Hyperterminal is still
enabled, regardless of the status of Telnet on the system.
1 Click the key beside Services .
2
Click on Telnet .
3
On the Telnet screen, change Status to Enabled .
!
Security note:
Using the Telnet interface poses a security risk since the Telnet protocol
is not encrypted.