Nortel BCM 3.7, Manual

Page: 258 / 1004

258 Assigning Trunk/line data
N0008589 3.3
Distinct ring None
Pattern 2
Pattern 3
Pattern 4 Choose the distinctive ring pattern that you want to assign to the line. This allows
you to provide selective service to calls with differing answer priorities.
When more than one line with the distinct ring settings rings at a telephone, the line
with the highest priority will ring first.
• Pattern 4 has the highest ring priority
• Pattern 3 has second highest ring priority
• Pattern 2 has third highest ring priority
• None has the lowest ring priority.
By default, all telephones and lines are set to None
Warning:
If you assign a distinctive ring pattern to a line, and that distinctive ring pattern has
already been assigned to a telephone, all telephones with that ring pattern will be
reset to pattern 1.
If you assign a distinctive ring pattern to a telephone, and that distinctive ring
pattern has already been assigned to a line, all lines with that ring pattern will be
reset to None.
Auto privacy Y or N Define whether one Business Communications Manager user can select a line in
use at another telephone to join an existing call. Refer to
“Turn Privacy on or off for
a call” on page 270 . ( FEATURE 83)
Answer
mode Manual
Auto
Define whether a trunk is manual or automatic answer.
Auto answer mode allows the trunk to be a shared resource by the system
telephones.
For auto answer trunks being used to allow remote call-in from system users, the
trunk can be configured to answer with a straight dial tone, if DISA has not been
enabled. It can also be configured to answer with a stuttered dial tone if DISA is
enabled and the caller is expected to enter a COS password. The COS password
defines which system features the caller is permitted to access.
Manual answer trunks are assigned to one or more telephones. The assigned
telephones exclusively own the line.
Answer with
DISA Y or N Define whether the system prompts a caller for a six-digit class of service (COS)
password (Y).
This setting appears for T1 loop start and T1 E&M lines that have
auto-answer mode. Set this option to No for T1 E&M lines on a private network that
have auto-answer mode.
Use auxiliary
ringer Y or N Turn the auxiliary ringer on or off for all telephones using this line.
When programmed on a line, the auxiliary ringer will ring every time a call is
received.
Note: When programmed only on a telephone, no ring occurs for a transferred call.
An auxiliary ringer can also be programmed in Services to ring for a line placed into
a scheduled Ringing service. Refer to
“Configuring ringing service” on page 496
Signaling WinkStart
Immediate
DelayDial
Select the signal type for the line. The immediate setting does not appear for T1
E&M or T1 DID trunks connected to a DTM if the Dial mode is set to tone.
Make sure that this matches the signal type programmed for the trunk at the other
switch.
ANI Number Y or N Define whether the telephone number of the caller will be collected for this line.
For T1 E&M and T1 DID trunks connected to a DTM, this setting only appears if
Signaling is set to WinkStart.
The central office must deliver ANI/DNIS in DTMF mode. No additional equipment
is required.
Table 35 E&M line fields (Continued)
Attribute Value Description