Nortel BCM 3.7, Manual

Page: 611 / 1004

Configuring a Network Device to be the IP Music Source 611
Programming Operations Guide
To play a sound file, click the Play button.
To stop a sound file, click the Stop button.
To pause a sound file, click the Pause button.
Configuring a Network Device to be the IP Music Source
To configure a Network Device to be the IP Music source:
1 On the navigation tree, click the Services key and click the IP Music heading.
The Summary screen appears.
2 Click the Network Device tab.
The Network Device screen appears.
3 Configure the Network Device parameters according to the following.
4 Press the Tab key to save your changes.
5 Press the Advanced Network tab.
The Advanced Network screen appears.
6 Configure the Advanced Network parameters according to the following.
Table 142 Networks Device parameters
Setting Definition
IP Address Enter the IP address of the music source.
You must enter this value in the proper dotted format.
RTP Port Enter the number of the source port used for the music source. This is the port the Business
Communications Manager uses to receive music from the music source.
The default value is 2216.
Stream Type Enter the codec that is used for the incoming music source audio stream. The codec you enter
here must match the codec used by the IP Music source.
The possible values are G.711 U-Law , G.711 A-Law , G.729 or G.723 .
The default value is G.711 U-Law.
Frames per
Packets Number of audio frames per RTP packet. The number of frames you enter must match the
number of frames per packet sent from the IP Music source.
The possible values are 1 , 2 or 3 .
The default value is 3.
Table 143 Advanced Networks parameters
Setting Definition
RTP Port Enter the number of the destination port used for the music source. This is the port Business
Communications Manager uses to send music to the users.
The default value is 2218.