Nortel BCM 3.7, Manual

Page: 788 / 1004

788 IPSec
N0008589 3.3
4 Configure the Remote IP Address Pool List settings according to the following table.
5 Click the Save button.
Modifying a Remote IP Address Pool
1 On the navigation tree, click the Services key and click the VPN key.
2
Click the IPSec key and click the Remote User Accounts heading.
The Remote IP Address Pool List screen appears.
3
Click the Remote Address Pool List you want to modify.
4 On the Configuration menu, click Modify IP Address Pool .
Or, right click the Remote Address Pool List you want to modify and click Modify IP
Address Pool .
The Remote IP Address Pool List screen appears.
5 Modify the Remote IP Address Pool List parameters.
For information about the settings, refer to the table above.
6 Click the Save button.
Deleting a Remote IP Address Pool
1 On the navigation tree, click the Services key and click the VPN key.
2 Click the IPSec key and click the Remote User Accounts heading.
The Remote IP Address Pool List screen appears.
3
Click the Remote Address Pool List you want to delete.
4 On the Configuration menu, click Delete IP Address Pool .
Or, right click the Remote Address Pool List you want to modify and click Delete IP Address
Pool . A message prompts you to confirm the deletion.
5 Click the Yes button.
Table 238 IPSec Remote IP Address Pool settings
Attribute Description
Pool Number Allows you to specify the Remote IP Address Pool List identifier.
The Pool Number uniquely identifies a Remote IP Address Pool List. The value for this setting
must follow certain conventions. You must type the prefix 'P' followed by a unique number
identifying the Remote IP Address Pool List. For example, 'P2' is a valid name. If you specify
an existing Pool number, you receive an error message. The Remote IP Address Pool List
identifier does not have any significance, other than uniquely identifying an entry.
Start Address Allows you to specify the first IP address in the Remote IP Address Pool List.
Enter the IP address in the dotted format.
End Address Allows you to specify the last IP address in the Remote IP Address Pool List.
Enter the IP address in the dotted format.
Subnet Mask Allows you to specify the subnet mask for the Remote IP Address Pool List.
Enter the Subnet Mask in the dotted format.