Nortel BCM 3.7, Manual

Page: 314 / 1004

314 Configuring the public and private dialing plans
N0008589 3.3
Figure 88 Configuring private network types
3
Use the following table to determine which values to set so callers can access a private
network.
Table 52 Private network values
Attribute Values Description
Type None, CDP, UDP You can specify if your Private network uses a coordinated
dialing plan (CDP) or a universal dialing plan (UDP).
If you choose None, the private networking supplementary
services are not available.
Location code <unique three-digit number> This code identifies this particular system for calls within the
network for a UDP dialing plan. This number must be
unique.
Note: The system uses the Private Access Code length,
plus the Location code length, plus the DN length to
determine the DN length required to determine that a call is
a private network call.
*Private DN lengths
(DPNSS only)
3-14 The Private DN lengths parameter specifies the length of a
dial string that the system uses to determine that the call is
a private network call, when the route uses DN Type:
Private.