manualshive.com logo in svg

Nortel BCM 3.7, Manual

The Nortel BCM 3.7 Manual is a comprehensive guide for users of this telecommunications system, providing detailed information on setup, maintenance, and troubleshooting. Easily download the manual for free from manualshive.com to ensure optimal performance of your Nortel BCM 3.7 system.

Share
Download
background image

Contents

13

Programming Operations Guide

Setting up public network dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316

About the Public DN lengths table   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316

Adding or modifying dialing plan Public DN lengths  . . . . . . . . . . . . . . . . . . . 317

Outgoing public calls routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318

Determining line access dialing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319

Understanding access codes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320

Programming access codes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321

Call Park codes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323

Creating Direct Dial sets  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324

Tips about access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326

Using the MCDN access codes (tandem calls) . . . . . . . . . . . . . . . . . . . . . . . . . . 327

Setting up line pool access codes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328

Using Carrier codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330

About Carrier access codes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Identifying Carrier access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330

Configuring call routing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331

Routing configuration   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333

Defining routes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333

Call by Call service routing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336

Programming the PRI routing table  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337

Enbloc dialing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337

Using destination codes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338

Why use destination codes?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339

Deciding on a code  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340

Grouping destination codes using a wild card  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341

Configuring destination codes with wild cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342

Create the destination code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
Set up the destination code schedules  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
Enable/disable wild card digits  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344

Setting up a destination for local calling   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344

Setting up a route through a dedicated trunk   . . . . . . . . . . . . . . . . . . . . . . . . . . . 345

Notes about the Absorbed length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346

Adding Carrier access codes to destination codes  . . . . . . . . . . . . . . . . . . . . . . . 346

Programming for least-cost routing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347

Using multiple routes and overflow routing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348

Using dialing restrictions with routing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350

Configuring Call by Call services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350

Supporting protocols  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350

Call by Call services  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351

Switches supporting Call by Call limits  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352

Provisioning for Call by Call limits with PRI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352

Other required programming in the Unified Manager  . . . . . . . . . . . . . . . . . . 352

Setting CbC limits  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353

Summary of Contents for BCM 3.7













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for BCM 3.7

M-Audio NRV10 User Manual preview
NRV10
Brand: M-Audio Pages: 32
F-SECURE ANTI-VIRUS FOR MIMESWEEPER - Administrator'S Manual preview
ANTI-VIRUS FOR MIMESWEEPER -
Brand: F-SECURE Pages: 44
Gallo Virtual Bass Amp Studio Devil User Manual preview
Virtual Bass Amp Studio Devil
Brand: Gallo Pages: 9
ICP ICP Controller Using Manual preview
ICP Controller
Brand: ICP Pages: 16
Xerox 701P40211 System Manual preview
701P40211
Brand: Xerox Pages: 110
MF DIGITAL Ripstation v4.4.11.0 Operating Manual preview
Ripstation v4.4.11.0
Brand: MF DIGITAL Pages: 43
Alarm Lock User Access Control (UAC) in Windows® Vista Tech Note preview
User Access Control (UAC) in Windows® Vista
Brand: Alarm Lock Pages: 2
Samsung SyncMaster S23A750D (Spanish) Manual Del Usuario preview
SyncMaster S23A750D
Brand: Samsung Pages: 90
Red Hat CERTIFICATE SYSTEM 7.2 - AGENT GUIDE Manual preview
CERTIFICATE SYSTEM 7.2 - AGENT GUIDE
Brand: Red Hat Pages: 73
ZyXEL Communications Auto Configuration Server Vantage Access Quick Start Manual preview
Auto Configuration Server Vantage Access
Brand: ZyXEL Communications Pages: 113
SimpleTech SimpleDrive SP-U25/120 Quick Start Manual preview
SimpleDrive SP-U25/120
Brand: SimpleTech Pages: 8
Globalsat GPS Information User Manual preview
GPS Information
Brand: Globalsat Pages: 7
DigiDesign Pro Tools M-Powered Basic Manual preview
Pro Tools M-Powered
Brand: DigiDesign Pages: 22
MACROMEDIA DIRECTOR MX-LINGO DICTIONARY Manual preview
DIRECTOR MX-LINGO DICTIONARY
Brand: MACROMEDIA Pages: 756
IBM RELEASE 7.3 Management Manual preview
RELEASE 7.3
Brand: IBM Pages: 388
Davis Instruments Energy WeatherLink User Manual preview
Energy WeatherLink
Brand: Davis Instruments Pages: 47
DataCard 7000 Series Specifications preview
7000 Series
Brand: DataCard Pages: 2
HP ProBook 5320m - Notebook PC User Manual preview
ProBook 5320m - Notebook PC
Brand: HP Pages: 147

Brands by name

Popular brands

Load more brands