Nortel BCM 3.7, Manual

Page: 393 / 1004

Creating telephone records with the Add Users Wizard 393
Programming Operations Guide
• If you choose the Auto Assign, the wizard populates the Line field for each DN you have
specified. Target line numbers are specified in sequence, starting with the number that you chose
in the
from field. The system also fills in the with Appr type and Appearances values
specified at the top of the table.
Figure 119 Target line assignments in the Wizard
If use DN as Public # is set to Yes (the default), the wizard populates the Public # field for
each DN with that DN. If the field is set to No, the Public # field will be blank so you can
manually entered your preferred number.
Note: The Wizard does not know about any previously assigned target lines. If you choose a
range of target lines in which lines have already been assigned to other DNs, the Wizard will
still assign that line to a currently-selected DN. If this is not what you want, go into the DN
record of the DN you do not want assigned to the line and assign another target line. Also
check the target line record, to ensure that it still has the correct Received Number specified.
Warning: Before you attempt to change this value, ensure that you are aware of the other
settings in your system that might be affected by the change.