Nortel BCM 3.7, Manual

Page: 567 / 1004

System set up for satellite systems 567
Programming Operations Guide
Configuring the telephone records:
9 Click on the keys beside System DNs , Active set DNs , DN YYY (the telephone you
associated with the voice mail target line), Line access , Line assignment .
10 Click on Line XXX (the target line you programmed for the telephone.
11
Set the Vmsg set field to Y (yes).
MWI note: If you require answer DNs to provide messaging waiting indicators (MWI), the
telephone with the DN must be assigned with a target line, and Vmsg set must be set to Y on
the telephone record.
Configuring Call forward to go to voice mail:
12
In the same DN, click on Capabilities .
13 Set the Allow redirect field to Y (yes).
14
Under Capabilities , click on Call Forward .
15 Enter the Voice Mail DN in both the Fwd no answer to and the Fwd on busy fields.
16
Repeat steps 12 to 18 for each of the DNs you want to assign to the remote voice mail.
17 Test the system.
VoIP networking note: If you are using H.323 VoIP trunks for central voice mail, you need to set
the following:
• Ensure that the local gateway protocol is set to CSE, based on the version of the satellite
systems.
• Ensure that the remote gateways are programmed to route using CDP.
• Ensure that the remote gateway protocols are set to CSE, based on the version of the satellite
system.
• Do not use SIP trunks for centralized voice mail.