Nortel BCM 3.7, Manual

Page: 650 / 1004

650 LAN settings for DHCP Server
N0008589 3.3
5 Configure the Excluded Address attributes according to the following table.
6
Click the Save button.
Modifying excluded address ranges
1 On the navigation tree, click the Services key and click the DHCP key.
2
Click the Local Scope key and click the LAN1 heading.
The LAN Scope Specific Options screen appears.
3
Click the Excluded Address tab.
The Excluded Address screen appears.
4
Click an excluded address range in the Excluded Address Range table.
5 On the Configuration menu, click Modify Excluded Address Range .
The Excluded Address dialog box appears.
6 Modify the Excluded Address settings.
7
Click the Save button.
Deleting an excluded address range
1 On the navigation tree, click the Services key and click the DHCP key.
2 Click the Local Scope key and click the LAN1 heading.
The LAN Scope Specific Options screen appears.
3 Click the Excluded Address tab.
The Excluded Address screen appears.
Table 161 Excluded Addresses
Attribute Description
Range (E#) Allows you to specify the Range identifier.
The range setting uniquely identifies an excluded range in the scope. The value for this setting
must follow certain conventions. You must type the prefix 'E' followed by a unique number
identifying the range in the table. For example, 'E2' is a valid name. Specify nonrecurring
values for the unique number. If you specify an existing excluded range name, the system
modifies the existing range. If you use non-sequential numbers the system automatically
reassigns sequential numbers. When you modify an excluded range, you cannot change the
range name. The excluded range identifier does not have any significance, other than uniquely
identifying an entry.
Start Address Allows you to specify a the first IP address in the Excluded Address Range.
Enter the IP address in the dotted format.
End Address Allows you to specify a the last IP address in the Excluded Address Range.
Enter the IP address in the dotted format.
Note: Make sure the start address and end address are in the same subnet. The excluded
address range must be completely contained in an IP address range specified for the
subnet.