Nortel BCM 3.7, Manual

Page: 878 / 1004

878 Configuring an analog device DN record
N0008589 3.3
Configuring an analog device DN record
This section describes the areas of DN record programming that are required or which
differ from a default setting.
For general information about DN record programming, refer to “Configuring DNs for
system devices” on page 399 .
The following table shows a detailed view of DN Record headings in Unified Manager.
Table Legend
† Required programming settings for basic operations of an analog device.
o
Optional programming settings for digital telephones and analog devices.
Programming settings not relevant to analog devices.
Table 284 DN Record headings
General Capabilities continued ATA settings
† Name † Paging † ATA answer timer
o Control set † D-Dial † ATA tones
Call log passwords o Priority call † ATA use
Line Access Auto hold † Msg indicate
† Prime line o Aux. ringer † ATA Dvc
† Intercom keys Allow redirect † Disconnect Supervision
OLI number Redirect ring User Preferences
Line Assignment Keep DN alive Button programming
† (Line 001) † Receive short tones User speed dial
† Appearance type SM Supervisor Restrictions
† Caller ID set Auto hold for incoming page Set restrictions
† Vmsg set Call Forward o Set lock
† Line pool access o Fwd no answer o Allow last number
Answer DNs o Fwd delay o Allow saved number
Capabilities o Fwd on busy † Allow link
DND on Busy Hotline o Schedules
† Handsfree o Internal o Line/set restrictions
† HF answerback † External Telco features
† Pickup grp o Intrusion
† Page zone