Nortel BCM 3.7, Manual

Page: 334 / 1004

334 Defining routes
N0008589 3.3
Figure 100 Define route parameters
7 Use the information in the following table to configure the route settings.
Table 60 Route settings
Attribute Value Description
External # <a maximum of 24
digits> Enter the external or dial-out number for the route you want the assigned
telephone to use. If all the required numbers are defined in the destination
code/dial string, this box can be left empty.
Optional entries:
F78: 1.5 second pause (counts as one digit in the dialing string)
F804: wait for dial tone (counts as two digits in the dialing string)
F71: Link
F808: Long tones
F*89: Programmed release
F*9: Run/Stop
Leave this entry blank if the route is directed to a VoIP line pool.
Use pool Pool A to Pool O or
PRI-A to PRI-F Select a line pool for the route.
The PRI pools only display if you configure an DTM for PRI.