Nortel BCM 3.7, Manual

Page: 152 / 1004

152 Defining trunk module types and settings
N0008589 3.3
Provisioning lines (PRI, T1, DASS2)
The Provision lines heading allows you to provision and deprovision lines associated with a T1
PRI, E1 (DASS2), or BRI ST/U interface.
Provisioning a line or loop makes it available for system use. A deprovisioned line/loop is not
available for use. If you are purchasing a partial PRI trunk, the lines that have not been assigned
must be set to Deprovisioned.
The line number listed in each Line <number> entry corresponds to the line numbers listed under
the Services, Telephony Services, Lines, Physical Lines, Enabled Physical Lines menu
heading.
Provisioning a line
Note that all PRI lines are provisioned by default.
1
Click the keys beside Resources, and Media Bay Modules .
2 Choose the a bus number (Bus 02 to 07) associated with the trunk module you want to
provision.
3
Click the key beside the Modules on Bus heading.
The single DTM module on this bus appears.
4
Choose the module.
Expand
Provision lines .
All the available lines appear as Line <number> headings.
5
Click the line you want to provision.
6
From the Status box, click Provisioned .