Nortel BCM 3.7, Manual

Page: 483 / 1004

Configuring system speed dial numbers 483
Programming Operations Guide
Assigning numbers to system speed dial codes
Follow these steps to create a speed dial code for quick-access to an external number:
1 Click on the keys beside Services , Telephony services , and System speed dial .
2
Click a Speed dial number (Speed dial # XXX).
Figure 164 Undefined speed dial screen
3
In the External # box, type the telephone number (up to 24 digits), and then press Enter .
If this is a new speed dial, more fields appear after you press Enter.
Figure 165 Expanded speed dial screen
4 Use the following table for the possible speed dial parameters
.
Table 102 Release reason values
Attribute Values Description
Facility Use prime line
Use line:
Pool code
Use routing table
Select the route you want the dialed number to take out of your
system.
Note: Any lines or pool codes that you specify must be assigned to
the telephone where the code is entered.
If you choose prime line, a prime line must be assigned to the
telephone where the code is entered.
Refer to “Assigning line access” on page 406 .
....
Speed dial # 070 or 255